TM 11-5905-334-34
(5) Slide post out of spring (5).
(6) Remove two screws (9), lockwashers (8), and
washers (7) to release pressure block (6).
(7) Remove three screws (fig. 2-20, item 3) to
separate flange (1) from body (2).
b. Cleaning, Inspection and Repair. Refer to
c. Reassembly.
(1) Insert ball end of cables (4) into reels (3) and
wrap cables around reels.
(2) Turn gearbox assembly (2) upside down and
slip reel over shaft ends.
(3) Place plugs (10) over shaft ends and slide
base (9) over them.
(4) Slip spring assemblies (8) between gearbox
and base and secure with bolts (7), lockwashers (6)
and washers (5).
(5) Replace crank handle on main driveshaft.
2-25. Repair of Lock-out Assembly, MK-2044/G
Figure 2-19. Spring assembly, exploded view, MK-2044/G.
a. Remove bolt (5) and nut (2) to release cable
clamp (1) from turnbuckle (3).
b. Remove bolt (5) and nut (2) to release clevis (4)
from turnbuckle (3).
Figure 2-20. Guy control reel exploded view, MK-2044-G.
2-25
Previous Page
