TM 11-5985-334-34
2-24. Repair of Guy Control Device, MK-2WG
(2) Lift gearbox (2) from base (9) and remove
reel assemblies (3) and plugs (10).
(3) Unwind cables (4) from reels (3) and remove
a Disassembly.
ball end of cable from slot in reel.
(1) Remove three screws (fig. 2-18, item 7),
(4) Remove bolt (fig. 2-19, item 1), washer (2),
lockwashers (6), and washers (5) attaching base (9) to
and saddle (3) to release clamp (4) from post (10)).
spring assemblies (8).
Figure 2-16. Winch assembly, MK-2044/G.
2-22
Previous Page
