TM 11-5985-334-34
practical touchup.
counterbores, slots, grooves, shoulders, flanges,
c. Repair. It is uneconomical to repair mechanical
teeth, tapped holes, and threaded members for
metal parts. Replace as necessary.
roughness of surface or corrosion.
(3) Inspect plated areas for damage requiring
2-34. Molded Plastic Parts
replating or refinishing beyond touchup repair.
Plastic parts include insulating members, mounting
c. Repair.
Machined metal parts are
pads, etc. Proceed as follows:
uneconomical to repair. Replace as necessary.
a. Cleaning.
2-33. Mechanical Metal Parts
(1) Use an air jet to blow dirt from surfaces,
holes, and crevices.
a. Cleaning. Mechanical metal parts include
(2) Wipe clean with a solvent-moistened lintless
mounting plates, mounting clamps and brackets,
cloth.
nuts, bolts, screws, washers, handles, fasteners, and
hardware. Clean in cleaning machine, or as set forth
(3) Dry and polish with a clean lintless cloth.
b. Inspection. Inspect for signs of corrosion,
cracks or wear.
b. Inspection. Inspect for physical damage or
c. Repair. It is uneconomical to repair molded
deformation. Check for corrosion and damage which
plastic parts. Replace as necessary.
would require replating or refinishing beyond
Section VI. TESTING
2-35. General
for components comprising an operable system.
(2) AB-621A/G-Refer to TM 11-5985-334-10
This section contains tests for use by direct support
for components comprising an operable system.
organizations. These procedures set forth specific
(3) MK-2044/GRefer to TM 11-5895-334-10
requirements that repaired equipment must meet
for components comprising the 100 foot extension
before being returned to the using organization. The
kit.
testing procedure may also be used as a guide for
b. Test Connections and Conditions. Refer to TM
the testing of equipment that has been repaired at
11-5895-334-10 for set up of equipment for
direct support.
operational tests.
2-36. Operational Test
c. AB-621/G Tests.
Control settings
a. Test Equipment and Material.
(1) AB-621/GRefer to TM 11-5985-334-10
2-28
Previous Page
