C 2, TM 11-5985-284-15
INSTALLATION AND OPERATION INSTRUCTIONS
Section I. SERVICE UPON RECEIPT OF ANTENNA LOOK AT-784/PRC
2-1. Unpacking
2-2. Checking Unpacked Equipment
a. Packaging Data. When packed for ship-
a. Inspect all equipment for damage possi-
ment, the components comprising Antenna,
bly incurred during shipment. If the equip-
Loop AT-784/PRC, are placed in a corrugated
ment has been damaged, report the damage
cardboard carton. A typical shipping carton
on DD Form 6 (para 1-3b).
and its contents is shown in figure 2-1. The
b. See that the equipment is complete as
dimensions of the carton are 10 by 6 by 5
listed on the packing slip, or paragraph 1-6.1.
inches.
Report all discrepancies in accordance with
b. Removing Contents. To unpack, proceed
AR 735-11-2. Shortage of a minor assembly or
as follows: Open the carton, lift out Bag, Cot-
part that does not affect proper functioning of
ton Duck CW-445/PRC, remove its contents,
the AT-1082/PRC should not prevent use of
and check the components (para 2-2, and para
the equipment.
NOTE
Installation
To install Antenna AT-1082/PRC, follow the
Save the original packing carton. It
procedures in a through e below.
can be used again when the equip-
a. Remove the AT-1082/PRC from the
ment is repacked for storage or
CW-445/PRC (carrying bag).
shipment.
Previous Page
