C 2, TM 11-5985-284-15
eluding Cap, Electrical CW-922/GRC (shield
cap), for the large antenna post of the as-
sociated radio receiver, attached by cord. It is
Antenna AT-1082/PRC is a compact, portable
u s e d to connect AT-1082/PRC to the as-
unit that is housed in a cast aluminum case. A
sociated receiving set.
loop antenna is mounted on top of the case
b. Cable Assembly, Radio Frequency
and it has an expendable sense whip antenna
CG-2840 A/U (12-Ft). This is a 12-foot cable
within its left side. The case is shaped to be
that is provided for extending the cable con-
easily hand held land serves to protect the
nection of the AT-1082/PRC to a receiving set
antenna assembly when it is folded down and
whenever required.
to protect its panel controls from accidental
c. Bag, Cotton Duck CW-445/PRC. This bag
damage by dropping. The grooved rear cover
is for carrying and storing Antenna
of this case allows access to the components
AT-1082/PRC, a shield cap for its output con-
and provides a watertight inclosure. An in-
nector, and the two associated cables. Mois-
s t r u c t i o n label that contains condensed
ture and fungus resistant cotton duck mater-
ial is used for the construction of this bag.
the cover. The control sof the AT-1082/PRC
include a bandswitch, a fine tuning control,
1-9. Additional Equipment
Required
Radio Set AN/PRC-25, AN/VRC-12, or equi-
1-8. Description of Associated Components
valent, is not supplied with Antenna, Loop
The minor components of Antenna, Loop
AT-784/PRC; however, one of similar type is
AT-784/PRC, which are associated with An-
required f o r u s e o f t h i s a n t e n n a . F o r
example: Radio Set AN/PRC-25, which is a
and are described below:
range of 30 to 76 MHz.
CG-3344/PRC (5-Ft). This is a 5-foot cable in-