TB 11-5820-1148-10
Return to the mast and take the next wire element (#3-4) at the #3 point and secure it to the mast or
balun as you did for the #1-2 wire. Pick up another resistor, and a plain 15-inch stake, and begin
walking at about a 20-degree angle off to one or the other side of the center wire.
5.4
ADD A SECOND RESISTOR
Insert a load resistor.
5.5
CONTINUE SECOND WIRE
Continue to unroll the wire until you come to a snap link. Attach the snap link to a stake. Drop the
stake on the ground. Stretch the wire out until it is straight.
1-17
Previous Page
