TM 11-5985-362-13
Table 2-2. REEL CONTENT AND ORDER FOR REWINDING ON REEL
ORDER
REEL
PART
ONTO
NO.
DESCRIPTION
NUMBER
REEL
1
Steel/Rope Lower Tower Guy (3)
305-GUY-02A
1
Stainless Steel Tower Guy
206-GUY-01A
2
Steel/Rope Middle Tower Guy (2)
305-GUY-01A
3
Rope Tower Guy (2)
202-GUY-37A
4
2
Left Catenary
222-CAT-01A
1
Right Catenary
221-CAT-01A
2
3
Main Feedline
181-FLA-01A
1
4
Vertical Radiator
278-RAD-01A
1
Main Radiator
277-RAD-01A
2
Side Layout Wire
124-WIR-03A
3
Back Layout Wire
124-WIR-02A
4
Center Layout Wire
124-WIR-01A
5
5
Back Radiator Guy (2)
182-DRP-02A
1
Obtain REEL NO. 4 at ANCHOR 6. Go from point to point and wind up MAIN RADIATOR. Begin at back of
MAIN FEEDLINE. Unclamp the MAIN RADIATOR only as required to wind it on reel. Disconnect the BACK
RADIATOR GUYS when they are reached.
From antenna transit case, obtain empty REEL NO. 2.
Starting at the front of antenna, wind the LEFT CATENARY onto REEL NO. 2. When drop wires are
reached, run the drop wire and CATENARY rope together until the INSULATOR on the drop wire is reached.
Clamp the INSULATOR to the CATENARY rope.
Repeat this clamping procedure for each drop wire.
2-62
Previous Page
