f. Assembly of Mast. With the female
end of the insulator and each mast section
facing the mast base, place the insulator
and the 16 mast sections on the ground, in
a line from the mast base to guy stake A.
Insert the female end of the insulator
over the male end of the mast base.
Insert the female end of the mast section
nearest the insulator over the male end of
the insulator. Add the next four mast
sections (mast sections 2 through 5)
allowing the mast sections to rest on the
ground. Place a guy plate on the male end
of mast section 5. Add mast sections 6
through 10 and place a guy plate on the
male end of mast section 10. Add mast
sections 11 through 16 and place a guy
plate on the male end of mast section 16.
g. Attaching Terminating Resistor Stop
to Mast. Usinq the terminating resistor
and four wingnuts
mount the terminating resistor stop
2 foot 8 1/2 inches(0.52 meter) from the
top of the mast