(2) Stake A Guys. Attach the snaphook on a red guy to the guy hole nearest
the ground in the top guy plate. Attach the snaphook on a white guy to the guy
hole nearest the ground in the center guy plate. Attach the snaphook on a blue guy
to the guy hole nearest the ground in the bottom guy plate. Being careful not to
tangle the guys, carry the free end of each of the three guys to guy stake B and
attach the three guys to guy stake B. Adjust Fastener FT-9 on each guy to tighten
the guys. While adjusting Fasteners FT-9, be careful not to bend the mast.
Disconnect the three guys from guy stake B, coil each - - - - the coils on the
ground next to guy stake A and attach the loose end on each guy to guy stake A.
(3) Stake B Guys. The snaphooks on the guys to be connected to guy stake B
are connected to the guy holes in the guy plates counterclockwise from the guy holes
occupied by the snaphooks of the stake A guys.
VIEW FROM TOP OF