TM 11-6625-1702-35
c. Procedure.
Control
settings
Step
Performance
standard
Test
procedures
No.
Test
equipment
Equipment under test
a. No damage evident or
1 N/A ------------- N/A -------------------- a. I n s p e c t c a s e a n d c h a s s i s
parts missing. Exter-
for damage, missing
nal surfaces intended
parts, and condition
of paint.
to be painted do not
show
metal.
bare
Panel
lettering is
legible.
Note. Touchup painting is rec-
ommended instead of refinishing
whenever practical; screw heads,
binding posts, receptacles, and
other plated parts will not be
painted or polished with abra-
sive.
b. Inspect all controls and b. Screws, bolts, and nuts
mechanical assemblies
are tight with none
for loose or missing
missing.
screws,
belts,
and
nuts.
c. Inspect all connectors, c. No loose or missing parts;
sockets, and recepta-
No damage evident.
cles, and fuseholder
and meter for loose-
ness, damage, or miss-
ing parts.
d. Rotate all panel con- d. Controls
rotate
freely
without binding or ex-
trols throughout their
cessive looseness.
limits of travel.
Figure 4-1. Dc meter scale test, test setup.
4-2
Previous Page
