TM 11-5985-371-12&P
Attach the snaphook on a red
guy
to the B guy hole in
the top guy plate
Attach the snaphook on a
white guy
to the B guy
hole in the center guy plate
Attach the snaphook
on a blue guy
to the B
guy hole in the bottom guy
. Being careful
plate
not to tangle the guys, carry
the free end of each of the
three guys to guy stake B
and attach the three
guys to guy stake B
Adjust Fastener FT-9 on each
guy to tighten the guys.
While adjusting Fasteners
FT-9, be careful not to bend
the mast.
(4) Stake D Guys. The
snaphooks on the guys to be
connected to guy stake D are
connected to the guy holes in
the guy plates clockwise
from the guy holes occupied
by the snaphooks on the
stake A guys.
Attach the snaphook on a red
guy
to the D guy hole in
the top guy plate
Attach the snaphook on a
white guy
to the D guy
hole in the center guy plate
Attach the snaphook
on a guy
to the D
guy hole in the bottom guy
Being careful
plate
not to tangle the guys, carry
the free end of each guy to
guy stake D
and attach
the three guys to guy stake
D. Being careful not to bend
the mast, adjust Fastener
FT-9 on each guy to tighten
the guy.
2-12