TM 11-5985-362-13
Move SLEEVE with marker tag 3 on the SIDE LAYOUT WIRE to CLAMP 3 on the CENTER LAYOUT WIRE
and clamp together.
Holding CLAMP 3 in position, pull SLEEVES (with marker tag 7) of RIGHT SIDE LAYOUT WIRE and BACK
LAYOUT WIRE together and locate position for right ANCHOR 7.
Repeat procedure with LEFT SIDE LAYOUT WIRE and BACK LAYOUT WIRE to locate position for left
ANCHOR 7.
Install new 30 inch anchors at these two points (Refer to page 2-21 for ANCHOR installation.)
2-52
Previous Page
