TM 11-5985-362-13
(10) Repeat steps (4), (5) and (6) to complete attachment of the first to second MEDIUM TOWER SECTIONS.
When complete, move to next joint.
(11) This joint (between the second and third MEDIUM TOWER SECTIONS) is the attachment point for the
steel/rope MIDDLE TOWER GUYS and STAINLESS STEEL TOWER GUY. Note direction of steel/rope
guys and place loop end of right and left side guys over the appropriate legs of the MEDIUM TOWER
SECTION. Place loop of STAINLESS STEEL TOWER GUY over top leg of section. Complete joint
assembly by repeating steps (4), (5) and (6) after loop ends of guys are positioned. When complete, move
to next joint.
(12) Repeat steps (4), (5) and (6) to complete the next joint of the MEDIUM TOWER SECTIONS. When
complete, move to top of the tower.
(13) The bottom legs (two on ground) of the last MEDIUM TOWER SECTION is the attachment point for the
two ROPE TOWER GUYS. Note direction of these two guys and loop end of right and left guy over their
appropriate leg of the MEDIUM TOWER SECTION. Repeat steps (4), (5) and (6) to complete attachment
of the TOWER TOP PLATE to last tower section.
2-29
Previous Page
