TM 11-5985-355-13
REMOVE ORIGINAL
1.
CAUTION: WHEN INSTALLED, THE
3 SCREWS & LOCKWASHERS
RESTRAINT ASSEMBLY (2) MUST FACE THE
INSTALL ADAPTER (1) WITH
REAR OF VEHICLE. THEREFORE,
SCREW CAP (7/16" LG)
DETERMINE THE POSITION OF THE
& LOCKWASHER (1/4")
ADAPTER (1) AND IF NECESSARY,
REPOSITION MX-9146/GRC IN VEHICLE.
2.
INSTALL THE ADAPTER (1) WITH ITS
SCREWS/LOCKWASHERS
3.
PLACE RESTRAINT ASSEMBLY (2) AGAINST
THE SPRING. INSTALL SCREWS/
TO THE ADAPTER.
4.
INSTALL THE INSERT (3) WITH SCREWS/
LOCKWASHERS.
5.
INSTALL THE CLAMP (4) WITH SCREWS/
ASSEMBLY.
EL3JX021
Figure 1-2. Restraint assembly, installation.
1-4