TM 32-5985-342-14&P
CHAPTER 5
ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. TOOLS AND EQUIPMENT
Maintenance Allocation Chart (MAC), Appendix D. Use
5-1. TOOLS AND TEST EQUIPMENT. The tools and
of these items is described in table 5-1 below.
test
equipment
required
and
authorized
for
organizational maintenance are listed in the
Table 5-1. Organizational Maintenance Tools and Test Equipment
NSN
Item
Use
Wrench, allen, 3/8-inch
Remove and/or tighten socket head
bolts.
Wrench, torque, 0-200 foot-pounds
Tighten fastener hardware.
Wrench, torque, 0-600 foot-pounds
Tighten fastener hardware.
Multimeter AN/USM-223
Perform voltage and resistance
measurements.
the Expendable Supplies and Materials List, Appendix
5-2.
MATERIALS.
The materials required and
authorized for organizational maintenance are listed in
Table 5-2. Organizational Maintenance Materials Required
NSN
Item
Use
6850-00-597-9763
Trichloroethane
Clean metal parts.
Brush, bristle
Remove corrosion and other
foreign matter from metal parts.
Paint, primer, zinc-chromate
Prime coat bare metal parts.
Paint, enamel, lusterless, olive drab
Finish coat metal parts.
Brush, paint, flat, 1-inch-wide
Repainting and touchup.
Cheesecloth, lint-free
Clean metal parts.
Oil, lubricating, 30 WT
Lubricate bearings and bushings.
Grease
Lubricate pawls, shafts, gears,
cam followers.
5-1
Previous Page
