TM 11-5985-362-13
e. CABLE CLAMP
The stainless steel tower guy and both ends of the main feedline are attached to their respective anchors using
the cable clamps.
TO USE
Loosen two nuts on clamp with wrench provided.
Use the winches to tension the guy and both ends of the main feedline.
Run free end of guy or feedline through open clamp jaw, around thimble placed in eye of anchor and back through
clamp jaw.
Apply tension to free end of guy or feedline cable.
Tighten two nuts on clamp to secure cable.
2-6
Previous Page
