TM 11-5985-355-13
APPENDIX B
COMPONENTS OF END ITEM LIST
Section I. INTRODUCTION
stock number assigned to the item and which will be
B-1. Scope
used for requisitioning.
This appendix lists integral components of and basic
c. Description. Indicates the Federal item name
issue items for the AS-2731/GRC to help you inventory
and, if required, a minimum description to identify the
items required for safe and efficient operation.
item. The part number indicates the primary number
B-2. General
used by the manufacturer, which controls the design and
This Components of End Item List is divided into the
characteristics of the item by means of its engineering
following sections:
drawings, specifications, standards, and inspection
a. Section II. Integral Components of the End
requirements to identify an item or range of items.
Item. These items, when assembled, comprise the AS-
Following the part number, the Federal Supply Code for
2731/GRC and must accompany it whenever it is
Manufacturers (FSCM) is shown in parentheses.
transferred or turned in. The illustrations will help you
d. Location. The physical location of each item
identify these items.
listed is given in this column. The lists are designed to
b. Section III. Basic Issue Items. These are the
inventory all items in one area of the major item before
minimum essential items required to place the AS-
moving on to an adjacent area.
2731/GRC in operation, to operate it, and to perform
e. Usable on Code. Not applicable.
emergency repairs. Although shipped separately packed
f. Quantity Required (Qty Reqd). This column
they must accompany the
AS-2731/GRCduring
lists the quantity of each item required for a complete
operation and whenever it is transferred between
major item.
accountable officers. The illustrations will assist you with
g. Quantity. This column is left blank for use
hard-to-identify items. This manual is your authority to
during an inventory. Under the Rcvd column, list the
requisition replacement B1, based on TOE/MOTE
quantity you actually receive on your major item. The
authorization of the end item.
Date columns are for your use when you inventory the
B-3. Explanation of Columns
major item.
a. Illustration. This column is divided as follows:
(1) Figure number. Indicates the figure
number of the illustration on which the-item is shown.
(2) Item number. (Not applicable.)
b. National Stock Number. Indicates the National
B-1
Previous Page
