assigned to indicate the levels of maintenance
This manual lists spares and repair parts; special tools
special test, measurement, and diagnostic equipment
authorized to USE and REPAIR support items. The
maintenance codes are entered in the third and fourth
(TMDE), and other special support equipment required
for performance of organizational, direct support, and
positions of the Uniform SMR Code format as follows:
general support maintenance of the AN/ARM-115. It
(a) The maintenance code entered in the third
authorize the requisitioning and issue of spares and
position will indicate the lowest maintenance level
repair parts as indicated by the source and mainte-
authorized to remove, replace, and use the support
item. The maintenance code entered in the third posi-
tion will indicate one of the following levels of mainte-
This Repair Parts and Special Tools List is divided into
the following sections
0 -Support item is removed, replaced, used at the
a . Section II. Repair Parts List. A list of spares and
repair parts authorized for use in the performance of
F -Support item is removed, replaced, used at the
maintenance. The list also includes parts which must
direct support level.
be removed for replacement of the authorized parts.
H -Support item is removed, replaced, used at the
Parts lists are composed of functional groups in
general support level.
numeric sequence, with the parts in each group listed
in figure and item number sequence.
(b) The maintenance code entered in the fourth
position indicates whether the item is to be repaired
b. Section III. Special Tools List. Not applicable.
and identifies the lowest maintenance level with the
c. Section IV. National Stock Number and Part
Number Index. A list, in National item identification
capability to perform complete repair (i.e., all
number (NIIN) sequence, of all National stock numbers
authorized maintenance functions). This position will
(NSN) appearing in the listings, followed by a list, in
contain one of the following maintenance codes:
alphameric sequence, of all part numbers appearing in
the listings. National stock numbers and part numbers
O --The lowest maintenance level capable of com-
are cross-referenced to each illustration figure and
plete repair of the support item is the organiza-
item number appearance.
F --The lowest maintenance level capable of com-
3. Explanation of Columns
plete repair of the support item is the direct
a.Illustration. This column is divided as follows
(1) Figure number. Indicates the figure number of
z --Nonreparable. No repair is authorized.
the illustration on which the item is shown.
(3) Recoverability code. Recoverability codes are
(2) Item number. The number used to identify item
assigned to support items to indicate the disposition ac-
called out in the illustration.
tion on unserviceable items. The recoverability code is
b. Source, Maintenance, and Recoverability (SMR)
entered in the fifth position of the Uniform SMR Code
format as follows:
(1) Source code. Source codes indicate the manner
of acquiring support items for maintenance, repair, or
overhaul of end items. Source codes are entered in the
z --Nonreparable item. When unserviceable, con-
first and second positions of the Uniform SMR Code
demn and dispose at the level indicated in posi-
format as follows:
0 --Reparable item.: When uneconomically reparable,
PA--Item procured and stocked for anticipated or
condemn and dispose at organizational level.
F --Reparable item. When uneconomically reparable,
condemn and dispose at the direct support
quired, item will be procured through normal
c. National Stock Number. Indicates the National
stock number assigned to the item and will be used for
Cannibalization or salvage maybe used as a
source of supply for any items source coded
above except those coded XA and aircraft
d. Part Number. Indicates the primary number used
support items as restricted by AR 700-42.