TM 32-5985-343-14&P
APPENDIX E
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
AD
Item to be assembled
at
depot
E-1 SCOPE. This appendix lists spares and repair
maintenance level.
parts; special tools; special Test, Measurement, and
Diagnostic Equipment (TMDE), and other special
XB
Item is not procured or stocked. If not
support equipment required for performance of
available through salvage, requisition.
organizational, direct support, and general support
maintenance of the Antenna Tower TS-1A. It authorizes
the requisitioning and issue of spare and repair parts as
NOTE: Cannibalization or salvage
indicated by the source and maintenance codes.
may be used as a source of supply
for any items coded above except
E-2 GENERAL. This Repair Parts and Special Tools
those coded XA and aircraft support
List is divided into the following sections:
items as restricted by AR 700-42.
(2) Maintenance Code. Maintenance codes
and repair parts authorized for use in the performance of
are assigned to indicate the levels of maintenance
maintenance. The list also includes parts which must be
authorized to USE and REPAIR support items. The
removed for replacement of the authorized parts. Parts
maintenance codes are entered in the third and fourth
lists are composed of functional groups in numeric
positions of the uniform SMR code format as follows:
sequence, with the parts in each group listed in figure
and item number sequence.
(a) The maintenance code entered in
the third position will indicate the lowest maintenance
level authorized to remove, replace, and use the support
Number Index. A list, in National Item Identification
item. The maintenance code entered in the third
Number (NIIN) sequence, of all National Stock Numbers
position will indicate one of the following levels of
(NSN) appearing in the listings, followed by a list in
maintenance:
alphanumeric sequence of all part numbers appearing in
the listings. National stock numbers and part numbers
Code
Application/Explanation
are cross-referenced to each illustration figure and item
O
Support item is removed, replaced, used
number appearance.
at the organizational level.
E-3 EXPLANATION OF COLUMNS.
(b) The maintenance code entered in
the fourth position indicates whether the item is to be
a. Illustration. This column is divided as follows:
repaired and identifies the lowest maintenance level
with the capability to perform complete repair; i.e., all
(1) Figure Number.
Indicates the figure
authorized maintenance functions. This position will
number of the illustration on which the item is shown.
contain one of the following maintenance codes:
(2) Item Number.
The number used to
identify item called out in the illustration.
Code
Application/Explanation
b. Source, Maintenance, and Recoverability (SMR)
F
The lowest maintenance level capable of
Codes.
complete repair of the support item is the
direct support level.
(1) Source Code. Source codes indicate the
D
The lowest maintenance level capable of
manner of acquiring support items for maintenance,
complete repair of the support item is the
repair, or overhaul of end items. Source codes are
depot level.
entered in the first and second positions of the uniform
Z
Nonreparable. No repair is authorized.
SMR code format as follows:
(3) Recoverability Code.
Recoverability
Code
Definition
codes are assigned to support items to indicate the
PA
Item
procured
and
stocked
for
disposition action
anticipated or known usage.
E-1