TM 11-5985-371-12&P
Table 4-1. Organizational Preventive Maintenance Checks and Services - Continued
M - Monthly
W - Weekly
D - Daily
Equipment Not
I
Ready/Available
Item to be Inspected
Item
Interval
If:
Procedure
No.
D
W
M
Bolts, wingnuts,
Mounting hardware.
3
Check the bolts, washers, wingnuts
or clamps loose
.
or dirty.
and clamps
securing the balun
to the mast
to assure they are clean,
intact, and not loose fitting.
tighten, or replace.
Connectors loose
Rf cable connector, balun, and antenna wire
4
or dirty.
connectors.
Insure that the rf cable
and antenna
wire connections
at the balun are
clean, intact, and not loose fitting.
Clean, tighten connectors.
~
Terminating resistor box connectors and
5
antenna wire.
Untie the halyard
from the cleat
on the balun
and lower the terminating
resistor box to the ground.
4-8
Previous Page
