TM 11-5985-370-12
Adjust the UPPER "BACK" GUY (hole 3) and LOWER "BACK" GUY (hole 3):
Lay them alongside one set of TAUT "SIDE" GUYS and adjust the "BACK" GUYS to the same
length.
Attach the GUY LOOPS of the UPPER "BACK" GUY and the LOWER "BACK" GUY to the
ANCHOR HOOK on the "BACK" GUY STAKE. THE BACK GUYS WILL NOT BE TAUT
AT THIS TIME.
NOTE: This now leaves the "FRONT" LOWER GUY rope and the "FRONT" UPPER GUY
rope free and unconnected. You will use these free GUYS during erection. The other
3 LOWER GUYS and 3 UPPER GUYS are now connected to GUY STAKES.
2-20
Previous Page
