TM 11-5985-370-12
PLACE a short STANDARD (20') over the
short MAST of the MAST AND BASE
ASSEMBLY and stretch out the STANDARD.
Locate four points, each 90 degrees
apart - 20 feet away from the mast
AND
permanently install 4 GUY STAKES,
use the HAMMER.
Position the movable short MAST on the
MAST AND BASE ASSEMBLY so it lays on
the MAST BASE PLATE in the
direction the mast will
be assembled.
Assemble the 5 LOWER MAST sections (insert the keyed male end into the keyed
female end).
Add the assembled 5 LOWER MAST SECTIONS to the short MAST
on the
MAST AND BASE
ASSEMBLY.
2-14
Previous Page
