TM 11-5985-362-13
Carry axle with REEL NO. 4 along MAIN FEEDLINE toward ANCHOR 1 until CLAMP 2 is reached on MAIN
FEEDLINE. Insert SLEEVE with marker tag 2 (of MAIN RADIATOR) into CLAMP 2 of MAIN FEEDLINE.
Tighten CLAMP 2 wingnut securely.
Walk REEL NO. 4 toward the first drop wire tip on the RIGHT CATENARY until the first pair of SLEEVES on
the MAIN RADIATOR are free from reel. Connect MAIN RADIATOR to insulator at end of drop wire.
If insulators are wrapped in paper discard paper/packing before installation.
2-38
Previous Page
