TM 11-5985-335-15
b.
Set both receiver meter switches to indicate the rf level of the received signal.
c. Establish voice contact between stations A and B. Use the order wire facilities, if incorporated in the associated
radio sets. Have station B retransmit to station A the signal received from station A.
d.
Station a man at each antenna site and provide telephone communications between each antenna site
and its associated radio set.
e.
Instruct the antenna man at station A to rotate his antenna slowly (15 degrees off the original position)
to obtain at station A a maximum received rf input level indication. If more than one peak is observed, use the peak of
maximum amplitude.
f. Instruct the antenna man at station A to adjust the antenna tilt angle (using the tilt rope of the tilting assembly) for
a maximum received rf input level indication.
24.4
Previous Page
