CHAPTER 1. INTRODUCTION - TM-11-5985-284-150005
Figure 1-1. Components comprising Antenna, Loop AT-78A/PRC
Section II. DESCRIPTION AND DATA
Components of Antenna, Loop AT-784/PRC
Description of Antenna AT-1082/PRC
CHAPTER 2. INSTALLATION AND OPERATION INSTRUCTIONS
Siting
Figure 2-2. Using AT-1082/PRC in good and bad operating areas.
Section II. ANTENNA CONTROLS
Section III. OPERATION UNDER USUAL CONDITIONS - TM-11-5985-284-150015
Operation
Section IV. OPERATION UNDER UNUSUAL CONDITIONS - TM-11-5985-284-150017
CHAPTER 3. OPERATOR'S AND ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Daily Preventive Maintenance Checks and Services Chart - TM-11-5985-284-150020
Daily Preventive Maintenance Checks and Services Chart-continued
Weekly Preventive Maintenance Checks and Services Chart
Monthly Preventive Maintenance Checks and Services Chart - TM-11-5985-284-150023
Control Knobs-continued
CHAPTER 4. DIRECT SUPPORT MAINTENANCE
Loop Antennas
Antenna AT-1082/PRC
Figure 4-3. Analysis of sense chip antenna
Figure 4-4. Antenna AT-1082/PRC (assembly A1), schematic diagram
Antenna AT-1082/PRC-continued
Section Il. DIRECT SUPPORT TROUBLESHOOTING AND REPAIR
Troubleshooting Chart-continued - TM-11-5985-284-150032
Figure 4-5. Antenna AT-1082/PRC (assembly A1), interior view.
Removal and Replacement of Chassis and Components
Replacement
Figure 4-6. Antenna AT-1082/PRC (assembly A1), location of removable parts
Figure 4-7. Antenna AT-1082/PRC, (assembly A1), front panel parts.
CHAPTER 5. GENERAL SUPPORT MAINTENANCE
Section II. GENERAL SUPPORT TESTING PROCEDURES
Procedure.
Figure 5-1. AT-1082/PRC, test setup for frequency range test
Figure 5-2. AT-1082/PRC, test setup
Frequency Range Test
Sensitivity, Attenuation, Null, and Sense Tests
Procedure for 30 MHz Tests-continued - TM-11-5985-284-150047
Procedure for 30 MHz Tests-continued - TM-11-5985-284-150048
Procedure for 40 MHz Tests
Procedure for 50 MHz Tests
Procedure for 60 MHz Tests
Procedure for 70 MHz Tests
Procedure for 76 MHz Tests
CHAPTER 6. DEPOT OVERHAUL STANDARDS
CHAPTER 7. SHIPMENT AND LIMITED STORAGE AND DEMOLITION TO PREVENT ENEMY USE
APPENDIX A. REFERENCES - TM-11-5985-284-150059
APPENDIX B. BASIC ISSUE ITEMS LIST
APPENDIX C. MAINTENANCE ALLOCATION
Tool and Test Equipment Requirements (Sect. III) - TM-11-5985-284-150064
SECTION II MAINTENANCE ALLOCATION CHART FOR ANTENNA, LOOP AT-784/PRC
SECTION II. TOOLS AND TEST EQUIPMENT REQUIREMENTS FOR ANTENNA, LOOP A7-784/PRC
SECTION IV. REMARKS - TM-11-5985-284-150067
TM-11-5985-284-15 Antenna Loop AT-784/PRC Manual
Figure 1-1. Components comprising Antenna, Loop AT-78A/PRC
Section II. DESCRIPTION AND DATA
Components of Antenna, Loop AT-784/PRC
Description of Antenna AT-1082/PRC
CHAPTER 2. INSTALLATION AND OPERATION INSTRUCTIONS
Siting
Figure 2-2. Using AT-1082/PRC in good and bad operating areas.
Section II. ANTENNA CONTROLS
Section III. OPERATION UNDER USUAL CONDITIONS - TM-11-5985-284-150015
Operation
Section IV. OPERATION UNDER UNUSUAL CONDITIONS - TM-11-5985-284-150017
CHAPTER 3. OPERATOR'S AND ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Daily Preventive Maintenance Checks and Services Chart - TM-11-5985-284-150020
Daily Preventive Maintenance Checks and Services Chart-continued
Weekly Preventive Maintenance Checks and Services Chart
Monthly Preventive Maintenance Checks and Services Chart - TM-11-5985-284-150023
Control Knobs-continued
CHAPTER 4. DIRECT SUPPORT MAINTENANCE
Loop Antennas
Antenna AT-1082/PRC
Figure 4-3. Analysis of sense chip antenna
Figure 4-4. Antenna AT-1082/PRC (assembly A1), schematic diagram
Antenna AT-1082/PRC-continued
Section Il. DIRECT SUPPORT TROUBLESHOOTING AND REPAIR
Troubleshooting Chart-continued - TM-11-5985-284-150032
Figure 4-5. Antenna AT-1082/PRC (assembly A1), interior view.
Removal and Replacement of Chassis and Components
Replacement
Figure 4-6. Antenna AT-1082/PRC (assembly A1), location of removable parts
Figure 4-7. Antenna AT-1082/PRC, (assembly A1), front panel parts.
CHAPTER 5. GENERAL SUPPORT MAINTENANCE
Section II. GENERAL SUPPORT TESTING PROCEDURES
Procedure.
Figure 5-1. AT-1082/PRC, test setup for frequency range test
Figure 5-2. AT-1082/PRC, test setup
Frequency Range Test
Sensitivity, Attenuation, Null, and Sense Tests
Procedure for 30 MHz Tests-continued - TM-11-5985-284-150047
Procedure for 30 MHz Tests-continued - TM-11-5985-284-150048
Procedure for 40 MHz Tests
Procedure for 50 MHz Tests
Procedure for 60 MHz Tests
Procedure for 70 MHz Tests
Procedure for 76 MHz Tests
CHAPTER 6. DEPOT OVERHAUL STANDARDS
CHAPTER 7. SHIPMENT AND LIMITED STORAGE AND DEMOLITION TO PREVENT ENEMY USE
APPENDIX A. REFERENCES - TM-11-5985-284-150059
APPENDIX B. BASIC ISSUE ITEMS LIST
APPENDIX C. MAINTENANCE ALLOCATION
Tool and Test Equipment Requirements (Sect. III) - TM-11-5985-284-150064
SECTION II MAINTENANCE ALLOCATION CHART FOR ANTENNA, LOOP AT-784/PRC
SECTION II. TOOLS AND TEST EQUIPMENT REQUIREMENTS FOR ANTENNA, LOOP A7-784/PRC
SECTION IV. REMARKS - TM-11-5985-284-150067
TM-11-5985-284-15 Antenna Loop AT-784/PRC Manual
