TM 11-5985-362-13
Using the hole made by the point of the anchor implanted during layout, dig a starter hole 4 inches (10.2 cm) to 8
inches (20.3 cm) deep with the shovel/pick and place one of the 30 inch anchors in the hole.
CAUTION
When installing anchor, use extreme care not to bend antenna coupler bar.
Place antenna coupler bar through anchor eye. Using two crewmembers exert a downward pressure on the bar and
rotate clockwise until anchor eye is a maximum of 1 ft. (.3 m) above ground level.
2-21