TM
11-5985-284-15
c. Procedure.
Test
Equipment under
Test procedure
equipment
test control
Performance standard
settings
settings
N/A___
a. Inspect all controls and mechanical
Screws, bolts, and nuts will be tight;
1
Controls may
a.
assemblies for loose or missing screws.
be in any
none missing.
b. Inspect coaxial connector for looseness
position.
b. No looseness or damage evident.
or damage.
a . Rotate BANDSWITCH, ATTENU-
2
N/A___
Controls may
a. Controls will rotate freely without
ATOR, and FINE TUNE controls.
be in any
binding or excessive looseness.
Note. FINE TUNE control will rotate through
position.
360.
b. Check to see that loop antenna extends
b. Loop antenna moves freely, without
and folds down and that detent mech-
excessive binding.
5-3